标题: [转帖]Do I have the right airplane for 3D? [打印本页] 作者: 论坛老模友 时间: 2003-2-10 05:53 标题: [转帖]Do I have the right airplane for 3D? Okay now that you have read what it takes to perform these 3D maneuvers, you need the right airplane to 3-D. Hangar 9's CAP 232 will meet and exceed all your expectations- for 3D and for all-around fun flying. An Ultra Series ARF, the CAP is 90% pre-built and covered with genuine Goldberg UltraCote? And it's a real beauty, too, trimmed in an authentic blue, teal and white scheme just like Champion U.S. Aerobatic Team Member Matt Chapman's full-scale CAP. A unique, two-piece aluminum engine mount features slotted beams, allowing nearly any 1.08 through 1.20 two-stroke or 1.20 through 1.50 four-stroke to fit. The CAP also features pre-painted fiberglass cowl and wheel pants, and includes genuine DuBro and Sullivan hardware- heavy-duty control horns, 4-40 threaded rods, metal golden clevises and pull-pull hardware- providing a very strong and accurate control system. And, with a 73" wingspan, it's IMAA legal via the 1/4 scale rule. With its dazzling design and top-drawer performance, it's no wonder the "wild card" CAP is the plane that everyone wants to fly.