电池电压10.64这么低？

VCC = WARN - VCC min/max diff 0.552v, should be <0.3v

VCC = WARN - VCC min/max diff 0.713v, should be <0.3v

VCC = WARN - VCC min/max diff 0.32v, should be <0.3v

这几个数据 正常吗？四轴小白求大神帮助。

可能你的3.3稳压IC坏了

电压保护？

preArm:Check Board Voltage翻译过来：（请你）检查面板（主板）电压"，莫非飞控坏球了？还是供电电调出问题了？但是校准油门行程是，推油门，四个电机运转都正常，无异响无卡顿，APM飞控各个指示灯均闪烁