[泡泡老师教程] 新手课堂，APM及MINI APM如何使用SBUS接收机的方法

华恒的家 · 发表于 2020-2-10 22:11

DoPerfect 发表于 2019-5-14 18:45
好的今天晚一点发你

老铁可以给我一份吗多谢269778884@qq.com

华恒的家 · 发表于 2020-2-11 02:09

一粒星尘发表于 2017-6-5 19:33
为我这样的小白捋一下大神的步骤（我的是2.8）：1－INPUT端口下侧（飞控机头方向向右，USB接口向上）有个三 ...

大神软件我好不容易找到了现在卡在更新驱动这里了 dfu这里

华恒的家 · 发表于 2020-2-11 02:21

OK for anyone who is interested I figured it out and was able to update the eeprom. What you need to do is update the device driver AFTER you boot the APM board and install the jumper and reset the Atmega32U2 (as per the instructions).

Right click on the ArduinoMega 2560 DFU and select 'Update Driver', browse to the location where your FLIP application is installed and find the 'USB' folder. For me that location was 'C:\Program Files (x86)\Atmel\Flip 3.4.7\usb'. Now click 'Next' and complete the update of the device driver. This may take a moment so be patient. Once it successfully competes follow the instructions for updating the PPM encoder here.

Once everything is working you should be able to connect via usb and see a screen like this: 自己百度翻译一下，成功解决为后来者节约时间