5iMX宗旨:分享遥控模型兴趣爱好

5iMX.com 我爱模型 玩家论坛 ——专业遥控模型和无人机玩家论坛(玩模型就上我爱模型,创始于2003年)
查看: 2066|回复: 11
打印 上一主题 下一主题

給已擁有700N的選手建議

[复制链接]
跳转到指定楼层
楼主
发表于 2008-5-24 11:17 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
這是法國一位選手在設定和測試上,發現的新設定值,供參考

Today I have done some flights with the T-REX 700 and I have one word :
FABULOUS!

===) Building

The building of that heli is really the easiest I have ever done. Few parts,
very very well engeniered (good job Align and Jason Krause), no need to do
something else that following the manual! Excellent !

The only thing I done is to put 2 flat washer between the tail vertical fin and
the black plastic piece (with that astucious pin for the antirotation on the
tail box) to prevent to bend the fin when I tightened the screw (I don't know if
it's clear .)

For the lenght of the linkage rod I have the following :
Page 8 on the manual (with the short ball on the mixing arm) : 46 mm instead of
44 mm for the links from the swashplate to the mixing arm and 13mm intead of
12mm for the links from the wash-out to the flybar cage. The others are OK.
Page 15 on the manual, with the long balls on the aileron levers and the servos
JR DS8717 with the Align servo horn, the lenght on the manual are PERFECT !

===) My Setup

T-REX 700
OS 91SZH running on 30%
MP5
DS8717 with Align servo horn
Spartan DS760 + BLS251 (with Bert Kammerer setup for the T-REX 700 and a few mod
for my personal style)
Main blades V-Blades 690 mm
V paddles 95 mm

Collective +-12°     **很重要~不要超過12!過大可能導致!當同時執行十字盤大動作的擺臂干涉.引擎重拖
Cyclic +-8°            **很重要~不要超過9!過大可能導致!當同時執行Pitch大動作的擺臂干涉.引擎重拖      
RPM 1900             **很重要~不要超過1950!

===) Flying that awesome heli!

Well I have done 6 flight today with that new bird (and a non breaked engine).
What can I say is it's really the best 90 size heli I ever flown ! The feeling
is really excellent, even in the wind. It's stable, it track like it's on rails,
and  it's really agile ! It's a very powerfull heli, even with a non breaked
engine !
A really good point too is the general noise of the heli : very silent ! And it
looks very good in the sky :)

I hope doing more flight this week-end and if the weather is good enough I'll go
at a local heli funfly Sunday.


I have attached a pics of me and the T-REX 700 and some of the heli. I should do
a video very soon.

Thank again Align for that jewel !

I forgot to mention that a lot of heli pilots where present at the field to see
the heli and after the flights their words were simply : 'When will it be
released because I want one !'

Very best regards from France

Olivier Camlong




欢迎继续阅读楼主其他信息

沙发
发表于 2008-5-24 14:31 | 只看该作者
感谢斑竹的提示!!!!
3
发表于 2008-5-24 16:19 | 只看该作者
恩 基本就是说好的 和标题的出入比较大,不过飞机看起来真的不错:)
4
 楼主| 发表于 2008-5-24 20:20 | 只看该作者
是LS的外語好,才會注意選手所說的

一般我們都只看中文的
5
发表于 2008-5-25 15:44 | 只看该作者
好漂亮
6
发表于 2008-5-26 16:03 | 只看该作者
垂直尾翼处的两个垫片已经加了:em19:
7
发表于 2008-5-27 23:17 | 只看该作者
为什么是英文
8
发表于 2008-5-28 10:21 | 只看该作者
我简单帮大家翻译一下:

安装》
安装真的很简单,一些地方做的非常好(感谢亚托和JK),只要根据说明书安装即可。
我只做了1个地方的改动,在垂直尾翼下垫了2个平垫圈,防止当螺丝锁紧的时候变形。
我最后的连杆长度:
说明书第8页,十字盘混控臂连杆改成44mm改成46mm,十字盘到副翼平衡框连杆长度12mm改成13mm
其他都还可以
JR DS8717和亚托的舵机架很合适。

我的配置》
T-REX 700
OS 91SZH running on 30%
MP5
#P-d"M%Z9{3Y.t
DS8717 with Align servo horn*T.~5p1G8l1c:` Q
Spartan DS760 + BLS251 (with Bert Kammerer setup for the T-REX 700 and a few mod
3Q1Y&}0U0d,S G6e*[bbs.5imx.comfor my personal style)
"K9X"Z!\8O
Main blades V-Blades 690 mm


飞行感受》
我连续不断的飞了6个起落,亚托700是我飞过最好的90级别的飞机, 感觉真的非常好,即使在有风的情况下,
稳定和敏捷,真的是一架强大的直升机。
亚托700真的有太多的优点,在天空中异常好看显眼。
我希望能在周末再多飞一下,如果天气好,我会去参加星期天我们本地举办的Funfly
我上点我和亚托700的照片,视频很快也可以上了。
谢谢亚托造了这样一颗宝石(我汗。。。)
我忘了说了,很多模友在飞过亚托700后只会说一句话“700什么时候上市,我要买一架”
9
发表于 2008-5-28 16:01 | 只看该作者
Thank again Align for that jewel...................  
Very best regards from France

从格式和口气上来看好象是这位老兄写给亚拓的信
10
发表于 2008-5-28 22:46 | 只看该作者
已经飞过15个起落,确实很爽!!!!!
11
发表于 2008-5-29 23:02 | 只看该作者
羡慕哦
12
发表于 2008-5-30 23:01 | 只看该作者
真是太美了
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

关闭

【站内推荐】上一条 /2 下一条

快速回复 返回顶部 返回列表