|
|
V2.04 Software Update
- Supports new telemetry G-Force sensors
- Calibration screen/ function has been improved
- Elevons when Flap System is active bug has been corrected
- Wing/tail channel assignment and switch selection interaction has been fixed.
DX8 Spektrum™ AirWare™
Change Log
Version 2.04
11-17-2011
Software Features
• Added G-Force telemetry support.
• Added “Knob” to calibration screen so users know the status as they calibrate it.
The knob neutral point was not being updated during calibration. We also
corrected the criteria for centering on the sticks to improve functionality in some
radios.
• The Switch Select page more accurately reflects the current switch assignment.
If a wing or tail type uses a channel that a switch is on, the switch setting is
changed to INH. It remains INH until manually reassigned.
• When a model is copied, the bind information for the copied model is now
erased. This will allow the user to see that the model is not bound, as it will not
show DSM2 or DSMX on the main screen.
• Calibration for mode changes uses the same screen as when a user manually
selects calibration. This means that mode change cal requires the user to move
both sticks in a + format (not like an O, X, L, or T), as well as rotate and center
the knob.
Software Corrections
• Translations – Improve/Correct translation of some terms for some German
Helicopter screens. Corrected Italian translation “Alettoni.”
• Calibration – when calibrating, the knob “neutral point” was not being updated.
• Flap System – The elevon flap system bug has been corrected. The flaps now
work smoothly and move correctly for the given speed values.
• Channel Assignments – Scrolling through the wing and tail types does not
change gear or aux channel assignments until the wing or tail type is actually
selected.
https://community.spektrumrc.com/
更新了什么啊 ？？？小弟E文很菜。。。。
[ 本帖最后由 neohack 于 2011-11-21 19:09 编辑 ] |
欢迎继续阅读楼主其他信息
|
/1 
发表于 2011-11-21 19:07
收藏
楼主