|
|
T8FG service Menu (successed)
--------------------------------------------------------------------------------
Greate news for Futaba T8FG users.
After few days institude on T8FG firmware and it's tinyfs structures, I successed entered T8FG service
menu and access all service futures (most import function is stick recalibration).
(based on the hard study of ajd999 on helifreak forum. oringal link: http://helifreak.com/showthread.php?t=217886)
Here is the detail procedure.
1. Get a empty SD card. (zero fill it if nessesary)
2. Insert into T8FG and format the card as prompted.
3. Copy a model to the SD card. (no matter the name or the type it is)
4. power off the TX and put the SD into a SD card reader on your computer.
5. use any HEX edit tool (I'm using ultraedit) to open tinyfs.bin file on the root directory of the
card. (you may need to enable show hidden files on your explorer options).
5.1 make changes to following addressed.
00200: 23 (original 43, or 03 if card is empty)
02200: 02 (original 00 if empty)
06480: 00 00 1F 77 93 D9 00 00 00 00 00 13 00 01 00 00 ( original all 00 or FF )
82E00: 54 38 46 47 20 20 54 45 53 54 28 4E 4F 52 45 53 45 54 29 00 ( stands for 'T8FG TEST
(NORESET)')
* 82E00 maybe different for you card vendor or capacity(I'm using APCER 1G 60x SD card). To find this
address. Find hex string "54 00 38 00 46 00 47 00", (should occure only once if the card was proper zero
filled), the leading two bytes beforce the address occured the match hex string will be 00 00 or 00 01.
(depends the model type you just created or copied in step 3. 00 00 for air plan, 00 01 for helicopter),
at the beginning of 00 00 or 00 01, replace with "T8FG TEST(NORESET)" (note there were two spaces
betwin T8FG and TEST.)
6. Insert the card into T8FG and poweron. you will get into service menu. (don't touch the update switch
besides the SD slot)
7. do some interesting things
*** WARRING !!!! OWN YOUR RISK TO DO THIS, EVERY STEP AFTER STEP 6 MAY DISTORY YOU TRANSMITTER ***
in addtion to 'T8FG TEST(NORESET)' there are following different "filenames" maybe used to enter different service menus.
'T8FG TEST(NORESET)' - Shows all service menus and allows making all the changes.
'T8FG TEST(LIMIT )' - Shows only a sub-set of service menus, with limited editing possibilities. E.g. Cannot change the product id, band, area...
'T8FG TEST(RST SS )' - Don't Known SS stands for
'FX-20 TEST(RST SS )' - Do service FX-20, Don't know SS.
'T8FG TEST(RST PCM)' - Don't Known detail, maybe reset PCM module locate
'FX-20 TEST(RST PCM )' - Do service FX-20, Reset PCM Module.
'T8FG TEST(NOEDIT )' - Shows all service menues, but prevents any changes. Includes an RF test screen.
'T8FG TEST(TELEC )' - Don't known what's purpose
'T8FG SCREEN SHOT ' - A screen shot of TX can be made with SW-H. Screen shots are stored on SD card and can be extracted with ffs.exe tool.
'T8FG TEST SHOT ' - maybe simular to screen shot
最新更新 (2010-6-18)
8FG/12FG Service SD Card 自动创建程序
http://starmoon.org.cn/share/software/RC/T8FGService.rar
[ 本帖最后由 starmoon 于 2010-6-18 22:51 编辑 ] |
欢迎继续阅读楼主其他信息
|
/1 
发表于 2010-6-17 01:58
收藏
楼主