|
v5.1 Upgrade primarily for SuperDuo and 1420i for ECDS, with minor ECDS improvements for all other EOS chargers
v5.0 Major changes and additions to support EOS SUITE (ECDS) Software improvements, and further PB charge enhancements
ECDS dated Sept 23 2010 or later is required if using v5.0 fw
v4.7 Mainly refinements to PB charge/discharge, with some minor changes for ECDS software
v4.3
* Enables EOS PC Control and Data Suite Software!
* Adds adjustable terminal voltage for PB (lead-acid charge)
* Adds FLOAT MODE to PB charge
* Changes PB Charge to true Bulk/Absorption/Float charge model (float optional)
* Adds OFF setting for PB Safety Timer (must be OFF for continuous FLOAT MODE)
v3.2 (the first fw update release for hardware v3 NET & DUO)
* Added Terminal Voltage Control Function (TVC). You MUST read this EXPLANATION before using TVC!!
* Changed Cooling Fan control such that the fan is stays on if case temp exceeds 45C, until falling below 40C.
NOTE: EOS Insight Logging Software must be version 1.5.0.46 or later if using v3.2 NET/DUO firmware. |
|