本帖最后由 ezk 于 2016-5-7 13:39 编辑
定价在$500
他们是和connex hd 合作 还是直接拿货不知道
宣称60fps, 0延迟(低于1ms), you管子上有演示视频 效果并不好
这是给穿越机用的 功率应该不大但是体积应该会很小
hobbyking 宣称 这是 类似70mhz 去2.4G的进化
5.10 一出 我马上买一个来看看 5.13 之前就可以拿到
模拟的接受发射机准备降价吗
国内其他厂家的高清图传也要加油了
connex 说图传是带720P摄像头的 The video is captured with the 720P camera that will be part of the HD system
Getting the HD link is just the first step, one of the key factors was to keep it small. at 45gr. for the Tx+ HD camera we were able to keep the size to the minimum.
The size of the camera is: 28x20x27 mm and the transmitter is at: 70 x 36.5 mm
Tx 端带720P摄像头 摄像头尺寸28x20x27 mm 发射机70 x 36.5 mm 共重45g
https://www.foxtechfpv.com/conne ... d-kit-preorder.html
Features:
- Uncompressed 720P High-Definition over a Digital-Link
- Support range of up to 1000ft/300m LOS
- Keeping zero latency, real-time video at all ranges
- 30 available HD channels over 5.8GHz (5.1GHz-5.8GHz) with easy to set options
- Offering solution for the novice racer as well as high-end racing
- Providing a spectators mode
- Built-in OSD capabilities
- Region-less Tx compatible with any Rx
- Mobile App configuration tool over bluetooth
Amimon New FPV Zero-Delay Camera features:
- HD 720P camera
- FPV optimized for indoor&outdoor flights
- Advanced hight-dynamic-range supported
- Dimensions-28x20x27mm
- 105 degree FOV with fixed lens
- Compatible with vision transmitter only
- Power up from vision transmitter
- Weight is 13g, 6g for the camera and 7g for the lens
Amimon New FPV Zero-Delay Transmitter specifications:
- Power consumption: 3.5W
- Power input: 6V-15V, 2S-4S battery supported
- Antennas: two external MMCX connectors
- Weight: 30g
- UX: 2 LED- status indication only
- Interface: Power in (4pins)
Power out to the camera&recorder
Micro USB-connection to application; wired pairing
Proprietary MIPI(14pin right-angle,JST SM20B-SRSS)-HD video input
- Environmental: Operating temperature: -10°to 50℃
Operating humidity: 10%-90%
Storage temperature: -10°to 75℃
Receiver specifications:
- Power consumption: 3-3.5W
- Power input: 6-28V, 2S-6S battery supported, reverse polarity protected
- Antennas: 5 antennas(5 external short SMA connectors)
- UX: 2 LED-status indication only;3 push button-for OSD control
- Interface: Power supply jack
Micro USB-connection to application; wired pairing
HDMI out- type A female
Bluetooth for application management control
- Environmental: Operating temperature: -10°to 50℃
Operating humidity: 10%-90%
Storage temperature: -10°to 75℃
Management application:
- Android & iOS Applications
- Bluetooth connectivity from mobile APP to vision ground unit
- Setting your device easily: Manual frequency setting
Regulatin®ional setting
Race mode for setting up races
- Built-in OSD-provides full functionality of OSD menu&buttons:
recording
choosing who to watch
Configuration of recorder, wireless setup&OSD
Your purchase includes:
- 1*Camera
- 1*Transmitter
- 1*Ground unit
- 1*Package of accessories
|